I wonder what he uses to catch fish. I'm guessing that it would be fishing line.sanderdelta
The weaklink is made of alluminium.
Releases
-
- Posts: 1338
- Joined: 2011/07/18 10:37:38 UTC
Re: Releases
- Tad Eareckson
- Posts: 9161
- Joined: 2010/11/25 03:48:55 UTC
Re: Releases
http://www.chgpa.org/forums/viewtopic.php?f=2&t=3600
Weak link question
Weak link question
Jim Rooney - 2008/11/25 20:49:28 UTC
One criteria is of course that they are recognizable... to me... not you.
But that's not it. They are kept because they have a huge track record. That's really hard to argue with.
I've yet to hear anyone successfully do so.
Plastic links...
"Manufactured by Bob" doesn't meet my criteria.
They are not manufactured to tolerances. They're not "manufactured" at all... They are a material that some guy found consistent enough to feel comfortable about. He cuts holes and tests, but it's still Bob in his backyard. He doesn't make the plastic, so he has no control over the quality of it.
That said, I'd feel a whole lot better about these than Tad's stuff.
- Tad Eareckson
- Posts: 9161
- Joined: 2010/11/25 03:48:55 UTC
Re: Releases
Nice video of an AT primary from the front end:
http://www.youtube.com/watch?v=jkYM_D_MMaU
52°59'47.54" N 007°01'23.61" E - Vliegveld Stadskanaal
01-00000
- 01 - chronological order
- -0 - minutes
- 00 - seconds
- 00 - frame (30 fps)
01-00000
http://live.staticflickr.com/65535/50070361438_5a95fed380_o.png
I think he's signaling that all the slack's out of the towline and he's ready to roll.
02-00726
http://live.staticflickr.com/65535/50071176732_a25e9b9b4a_o.png
03-00826
http://live.staticflickr.com/65535/50070923476_e0b3b40b1a_o.png
04-01009
http://live.staticflickr.com/65535/50070923466_d9f7fe2bc5_o.png
05-02103
http://live.staticflickr.com/65535/50071176642_7620f2ff02_o.png
06-03510
http://live.staticflickr.com/65535/50070923386_8cc318dd60_o.png
07-03614
http://live.staticflickr.com/65535/50070923371_73dbf1fb6c_o.png
08-03714
http://live.staticflickr.com/65535/50071176622_d35570d81f_o.png
09-03802
http://live.staticflickr.com/65535/50070923351_c90afc9ea1_o.png
10-03807
http://live.staticflickr.com/65535/50071176612_11a5574e86_o.png
Novice level glider, needs a fin for yaw stability but doesn't need an upper bridle connection to trim for certified pitch control range and is OK with an easily reachable release 'cause he'll be able to maintain adequate control with the other hand while dealing with a lockout emergency.
11-03907
http://live.staticflickr.com/65535/50071176582_2195a555f9_o.png
12-04004
http://live.staticflickr.com/65535/50070361278_55e63076aa_o.png
13-04016
http://live.staticflickr.com/65535/50070361263_642f3c4f0e_o.png
Taking off to the NE with a latish afternoon sun. Air seems to be glass or close.
15-04327
http://live.staticflickr.com/65535/50071176567_4af80c9494_o.png
14-04118
http://live.staticflickr.com/65535/50071176552_1f55bdf589_o.png
Kinda fun to watch the control linkage while we're correcting for roll. The projection between the wing and the horizontal stabilizer is undoubtedly the camera mount from which we got the first two frames. Glider's visible and in good position just above the horizon.
16-05013
http://live.staticflickr.com/65535/50070923291_3a2aa4b13f_o.png
17-05201
http://live.staticflickr.com/65535/50070361203_f5c1dba8b7_o.png
18-05312
http://live.staticflickr.com/65535/50070361153_15f132d5f7_o.png
19-05512
http://live.staticflickr.com/65535/50070361103_44076efb6a_o.png
20-05810
http://live.staticflickr.com/65535/50070923156_84e44ee307_o.png
21-10503
http://live.staticflickr.com/65535/50070361013_ccbe4e0e35_o.png
22-10518
http://live.staticflickr.com/65535/50070923096_2918ebd001_o.png
23-11727
http://live.staticflickr.com/65535/50071176267_e75f0f6e4c_o.png
24-11828
http://live.staticflickr.com/65535/50071176227_5a203bd4d7_o.png
25-11924
http://live.staticflickr.com/65535/50070923031_2a5d0d93e3_o.png
26-12505
http://live.staticflickr.com/65535/50070923016_4101257a6f_o.png
27-12798
http://live.staticflickr.com/65535/50070360833_42f6de1d54_o.png
28-12921
http://live.staticflickr.com/65535/50070922976_daff72b1cd_o.png
Wave-off.
29-13121
http://live.staticflickr.com/65535/50070360813_630f4fb97d_o.png
30-13126
http://live.staticflickr.com/65535/50071176082_74c8d123b2_o.png
31-13129
http://live.staticflickr.com/65535/50071176077_4cc3c6d14f_o.png
Glider off, engine idled, stick over for spiral descent.
32-13217
http://live.staticflickr.com/65535/50070922901_0c6a9b09ef_o.png
Aft camera mount again becoming visible.
33-13301
http://live.staticflickr.com/65535/50070922856_6e9767e409_o.png
34-13317
http://live.staticflickr.com/65535/50071176007_6ef3b48a07_o.png
35-13414
http://live.staticflickr.com/65535/50070922811_ab0ccc4853_o.png
36-13622
http://live.staticflickr.com/65535/50071175972_c90acd0a10_o.png
37-13808
http://live.staticflickr.com/65535/50070360613_8783d08db8_o.png
38-13920
http://live.staticflickr.com/65535/50070922761_d019a1188b_o.png
39-14141
http://live.staticflickr.com/65535/50071175897_a272c8b14d_o.png
40-14309
http://live.staticflickr.com/65535/50070922721_03117f1977_o.png
41-14513
http://live.staticflickr.com/65535/50071175867_3d8731716d_o.png
42-14729
http://live.staticflickr.com/65535/50071175812_a63bba4f83_o.png
43-15007
http://live.staticflickr.com/65535/50070922661_4e08d58078_o.png
44-15229
http://live.staticflickr.com/65535/50071175777_3745c7b45f_o.png
45-15423
http://live.staticflickr.com/65535/50070360403_f577a8647f_o.png
Jump to top:
http://www.kitestrings.org/post11967.html#p11967
http://www.youtube.com/watch?v=jkYM_D_MMaU
Tend not to get many of these.Maarten Spoek - 2009/09/22
Images of aerotowing hang gliders in the Netherlands (Stadskanaal). Flying club Daidalos. WW Sport2 pilot is me (Maarten Spoek) and tow pilot on a Dragonfly is Rinus In het Groen.
52°59'47.54" N 007°01'23.61" E - Vliegveld Stadskanaal
01-00000
- 01 - chronological order
- -0 - minutes
- 00 - seconds
- 00 - frame (30 fps)
01-00000
http://live.staticflickr.com/65535/50070361438_5a95fed380_o.png
I think he's signaling that all the slack's out of the towline and he's ready to roll.
02-00726
http://live.staticflickr.com/65535/50071176732_a25e9b9b4a_o.png
03-00826
http://live.staticflickr.com/65535/50070923476_e0b3b40b1a_o.png
04-01009
http://live.staticflickr.com/65535/50070923466_d9f7fe2bc5_o.png
05-02103
http://live.staticflickr.com/65535/50071176642_7620f2ff02_o.png
06-03510
http://live.staticflickr.com/65535/50070923386_8cc318dd60_o.png
07-03614
http://live.staticflickr.com/65535/50070923371_73dbf1fb6c_o.png
08-03714
http://live.staticflickr.com/65535/50071176622_d35570d81f_o.png
09-03802
http://live.staticflickr.com/65535/50070923351_c90afc9ea1_o.png
10-03807
http://live.staticflickr.com/65535/50071176612_11a5574e86_o.png
Novice level glider, needs a fin for yaw stability but doesn't need an upper bridle connection to trim for certified pitch control range and is OK with an easily reachable release 'cause he'll be able to maintain adequate control with the other hand while dealing with a lockout emergency.
11-03907
http://live.staticflickr.com/65535/50071176582_2195a555f9_o.png
12-04004
http://live.staticflickr.com/65535/50070361278_55e63076aa_o.png
13-04016
http://live.staticflickr.com/65535/50070361263_642f3c4f0e_o.png
Taking off to the NE with a latish afternoon sun. Air seems to be glass or close.
15-04327
http://live.staticflickr.com/65535/50071176567_4af80c9494_o.png
14-04118
http://live.staticflickr.com/65535/50071176552_1f55bdf589_o.png
Kinda fun to watch the control linkage while we're correcting for roll. The projection between the wing and the horizontal stabilizer is undoubtedly the camera mount from which we got the first two frames. Glider's visible and in good position just above the horizon.
16-05013
http://live.staticflickr.com/65535/50070923291_3a2aa4b13f_o.png
17-05201
http://live.staticflickr.com/65535/50070361203_f5c1dba8b7_o.png
18-05312
http://live.staticflickr.com/65535/50070361153_15f132d5f7_o.png
19-05512
http://live.staticflickr.com/65535/50070361103_44076efb6a_o.png
20-05810
http://live.staticflickr.com/65535/50070923156_84e44ee307_o.png
21-10503
http://live.staticflickr.com/65535/50070361013_ccbe4e0e35_o.png
22-10518
http://live.staticflickr.com/65535/50070923096_2918ebd001_o.png
23-11727
http://live.staticflickr.com/65535/50071176267_e75f0f6e4c_o.png
24-11828
http://live.staticflickr.com/65535/50071176227_5a203bd4d7_o.png
25-11924
http://live.staticflickr.com/65535/50070923031_2a5d0d93e3_o.png
26-12505
http://live.staticflickr.com/65535/50070923016_4101257a6f_o.png
27-12798
http://live.staticflickr.com/65535/50070360833_42f6de1d54_o.png
28-12921
http://live.staticflickr.com/65535/50070922976_daff72b1cd_o.png
Wave-off.
29-13121
http://live.staticflickr.com/65535/50070360813_630f4fb97d_o.png
30-13126
http://live.staticflickr.com/65535/50071176082_74c8d123b2_o.png
31-13129
http://live.staticflickr.com/65535/50071176077_4cc3c6d14f_o.png
Glider off, engine idled, stick over for spiral descent.
32-13217
http://live.staticflickr.com/65535/50070922901_0c6a9b09ef_o.png
Aft camera mount again becoming visible.
33-13301
http://live.staticflickr.com/65535/50070922856_6e9767e409_o.png
34-13317
http://live.staticflickr.com/65535/50071176007_6ef3b48a07_o.png
35-13414
http://live.staticflickr.com/65535/50070922811_ab0ccc4853_o.png
36-13622
http://live.staticflickr.com/65535/50071175972_c90acd0a10_o.png
37-13808
http://live.staticflickr.com/65535/50070360613_8783d08db8_o.png
38-13920
http://live.staticflickr.com/65535/50070922761_d019a1188b_o.png
39-14141
http://live.staticflickr.com/65535/50071175897_a272c8b14d_o.png
40-14309
http://live.staticflickr.com/65535/50070922721_03117f1977_o.png
41-14513
http://live.staticflickr.com/65535/50071175867_3d8731716d_o.png
42-14729
http://live.staticflickr.com/65535/50071175812_a63bba4f83_o.png
43-15007
http://live.staticflickr.com/65535/50070922661_4e08d58078_o.png
44-15229
http://live.staticflickr.com/65535/50071175777_3745c7b45f_o.png
45-15423
http://live.staticflickr.com/65535/50070360403_f577a8647f_o.png
Jump to top:
http://www.kitestrings.org/post11967.html#p11967
- Tad Eareckson
- Posts: 9161
- Joined: 2010/11/25 03:48:55 UTC
Re: Releases
Bit of a bum-out for Christmas morning.
I was doing some amendment/revision work on my scope article, needed to look up some terminology regarding hardware, tried to go to my Annapolis Performance Sailing site, found that they'd gone totally and permanently extinct - as announced 2020/05/21. A bug victim at the end.
Hang gliders are essentially repurposed sailboats - use all the same engineering, materials, hardware for everything - and not too long after the first August weekend Currituck stop of the 1991 Dragonfly promo tour I started looking for hardware around which I could build my own - BETTER - AT release system.
Didn't take me very long to find my way into APS and first lay eyes on the Wichard 2673 spinnaker shackle - about a half hour after Wallaby had made the connection themselves. It was beautiful and I was captivated.
http://www.flickr.com/photos/aerotowrelease/8305428629/
I DID, however, IMMEDIATELY have concerns about the adverse taper and notch issue - which would be at least a major deal breaker in the 2005/01/09 Bobby/Robin lockout fatality - but I played with it extensively and concluded it would be a manageable problem until either something better came along or I could figure something better out.
I imagine those douchebags were also aware of the issue but if they haven't killed anybody after a weekend or two it becomes Industry Standard. And way more so if they DO kill somebody in the first or second weekend. And I'm totally serious about that. Remember the 1990/07/05 Birrenator...
...fatality?
But anyway... After Highland Aerosports opened up in the spring of '99 I practically lived at APS playing with hardware, learning about cordage and splicing, building my load testers. Pretty much everything you're seeing in my bench shot equipment photos came out of that place.
But as we all now know there was no way in hell The Industry was ever gonna tolerate any innovation that didn't already have an extremely long track record - along with any innovator of anything - and I don't think I ever set foot in the place after the end of the 2008 season and my career.
But... The APS I had known had gone extinct anyway - I just found out - at least a fair bit before the plague hit our shores. They'd gone entirely out of the Performance Sailing business and entirely into the water-centric apparel / tourist clothing business - and had really pissed off their original clientele base.
Heavy wind and rain with very warm temperatures most of yesterday and into the night. Cold, overcast, clearing but with a few snowflakes one has to look hard to see coming down. Hope to get another shot at the waning Conjunction three hours from now.
I was doing some amendment/revision work on my scope article, needed to look up some terminology regarding hardware, tried to go to my Annapolis Performance Sailing site, found that they'd gone totally and permanently extinct - as announced 2020/05/21. A bug victim at the end.
Hang gliders are essentially repurposed sailboats - use all the same engineering, materials, hardware for everything - and not too long after the first August weekend Currituck stop of the 1991 Dragonfly promo tour I started looking for hardware around which I could build my own - BETTER - AT release system.
Didn't take me very long to find my way into APS and first lay eyes on the Wichard 2673 spinnaker shackle - about a half hour after Wallaby had made the connection themselves. It was beautiful and I was captivated.
http://www.flickr.com/photos/aerotowrelease/8305428629/
I DID, however, IMMEDIATELY have concerns about the adverse taper and notch issue - which would be at least a major deal breaker in the 2005/01/09 Bobby/Robin lockout fatality - but I played with it extensively and concluded it would be a manageable problem until either something better came along or I could figure something better out.
I imagine those douchebags were also aware of the issue but if they haven't killed anybody after a weekend or two it becomes Industry Standard. And way more so if they DO kill somebody in the first or second weekend. And I'm totally serious about that. Remember the 1990/07/05 Birrenator...
...fatality?
But anyway... After Highland Aerosports opened up in the spring of '99 I practically lived at APS playing with hardware, learning about cordage and splicing, building my load testers. Pretty much everything you're seeing in my bench shot equipment photos came out of that place.
But as we all now know there was no way in hell The Industry was ever gonna tolerate any innovation that didn't already have an extremely long track record - along with any innovator of anything - and I don't think I ever set foot in the place after the end of the 2008 season and my career.
But... The APS I had known had gone extinct anyway - I just found out - at least a fair bit before the plague hit our shores. They'd gone entirely out of the Performance Sailing business and entirely into the water-centric apparel / tourist clothing business - and had really pissed off their original clientele base.
Heavy wind and rain with very warm temperatures most of yesterday and into the night. Cold, overcast, clearing but with a few snowflakes one has to look hard to see coming down. Hope to get another shot at the waning Conjunction three hours from now.
-
- Posts: 1338
- Joined: 2011/07/18 10:37:38 UTC
- Tad Eareckson
- Posts: 9161
- Joined: 2010/11/25 03:48:55 UTC
Re: Releases
This is another classic Woiwode "pilot" induced lockout incident.
18-3003
And for the purpose of the exercise it's a static/fixed line surface tow. Aero has absolutely nothing to do with anything - save for the ease with which the driver fixed whatever was going on back there. Comments are the usual degree of clueless. Astoundingly great video - needs a stills project.
---
2021/01/12 14:50:00 UTC
Stills project up at:
http://www.kitestrings.org/post12198.html#p12198
18-3003
And for the purpose of the exercise it's a static/fixed line surface tow. Aero has absolutely nothing to do with anything - save for the ease with which the driver fixed whatever was going on back there. Comments are the usual degree of clueless. Astoundingly great video - needs a stills project.
---
2021/01/12 14:50:00 UTC
Stills project up at:
http://www.kitestrings.org/post12198.html#p12198
- Tad Eareckson
- Posts: 9161
- Joined: 2010/11/25 03:48:55 UTC
Re: Releases
http://www.hanggliding.org/viewtopic.php?t=37044
Russian Mouth Release
http://ozreport.com/pub/images/fingerlakesaccident2.jpg
http://ozreport.com/pub/images/fingerlakesaccident3.jpg
01-001
04-200
07-300
10-307
15-413
had slammed in with his teeth still clamped onto one of those Kaluzhin pieces o' shit?
25-32016
http://farm6.staticflickr.com/5548/14306846174_185f09082e_o.png
http://farm6.staticflickr.com/5530/14120804830_2aabd74d25_o.png
12-22509
- Sure thing, Red. The Industry pin benders are gonna engineer a release in which a driven BREATH is gonna be able to safely blow four to six hundred pounds of towline tension. I'll start holding mine right now in preparation for the day that happens.
- 2018/02/14 11:53:35 UTC - The Jack Show
- 2017/06/18 04:05:36 UTC - Kite Strings
So very depressing.
Still no comment anywhere on that unimaginably horrifying thousand foot plummet two days ago. And I'm supposed to be the sport's most callous sociopath ever.
Russian Mouth Release
Harrythehappyhangie - 2021/05/05 04:19:19 UTC
Hi all,
Can anyone give me the contact details for the manufacturer of the Russian Mouth Release please. Thanks
Red Howard - 2021/05/05 14:44:23 UTC
Harry,
In the past, mouth controls (mostly used for throttle, on a motor unit) have had a disastrous history of accidents. The pilot outcomes were appalling, and worse. If the item you want will be in the mouth at launch, I would not endorse that device, unless it was very similar to a football player's mouth-guard.
Some device that is activated by driving a breath into a small rubber tube should be safer that any semi-hard object in the mouth, unless that object is similar to a mouth-guard. I would encourage any reduction in risks, when flying.
My US$.02 worth . . .
Dan DeWeese - 2021/05/06 15:25:47 UTC
the ozreport links to back issues mentioning it are broken.
Post back here if you find it as I'm interested too.
dew98765 - 2021/05/06 19:28:16 UTC
Is this the item that you are asking about?
http://www.hanggliding.org/viewtopic.php?t=34505
Russian Mouth Release For Sale
Col Rushton - 2021/05/06 21:22:07 UTC
At the Dalby Big Air aero-tow comp 2 weeks ago I saw a few different bridle set ups and releases. 95% were Pro-tow setups with barrel releases, a least one Birren Link-knife release and one Mouth release, both using a pro-tow bridle set-up.
Talking to Michael about his mouth release, he was very happy after 5 years with his set-up, however he was wanting to buy a new one too.
There are many issues to consider when thinking about your towing set-up but being able to release while still holding on, trying to control a worsening situation is a great plus.
My mate thought if a HG manufacturer would sell a mouth release perhaps their use may increase?
Incorporating some of Reds suggestions could be good.
Hope you find your Russian Harry
"All" being everyone on The Jack Show - the worlds largest local coffee shop. The only people worth talking to - thanks, of course, to the quality control measures your local coffee shop owner works so tirelessly to maintain.Harrythehappyhangie - 2021/05/05 04:19:19 UTC
Hi all,
All the reputable towing operations and schools have them readily available - Wallaby, Wilotree, Florida Ridge, Lockout, Kitty Hawk, Blue Sky, Ridgely, Morningside, Cloud 9, Hang Glide Chicago... But what's wrong with the easily reachable job you're using now? If you're so happy as things are why would you be the least bit interested?Can anyone give me the contact details for the manufacturer of the Russian Mouth Release please. Thanks
Red's about to give us the benefit of his boundless wisdom. This should be all you'll ever need to know on the issue. ANY issue for that matter.Red Howard - 2021/05/05 14:44:23 UTC
None of which has actually been documented anywhere. But anything that oozes forth out of any of Red's orifices can be safely taken to the bank.In the past, mouth controls (mostly used for throttle, on a motor unit) have had a disastrous history of accidents.
Yeah, ya wanna be staying with the simple tried and true stuff. Can one even IMAGINE the carnage that might have resulted if one of these assholes:The pilot outcomes were appalling, and worse.
http://ozreport.com/pub/images/fingerlakesaccident2.jpg
http://ozreport.com/pub/images/fingerlakesaccident3.jpg
01-001
04-200
07-300
10-307
15-413
had slammed in with his teeth still clamped onto one of those Kaluzhin pieces o' shit?
25-32016
http://farm6.staticflickr.com/5548/14306846174_185f09082e_o.png
http://farm6.staticflickr.com/5530/14120804830_2aabd74d25_o.png
12-22509
Well here's a thought... Leave it dangling somewhere within easy reach at launch. Then when you get into a lockout situation at a safe interval after launch you can easily reach it, engage it in your mouth, give it a firm bite, clear it, execute a perfectly timed landing flare. But I really have no idea how a scenario like that could occur 'cause an appropriate weak link with a finished length of 1.5 inches or less will always break before you can get into too much trouble.If the item you want will be in the mouth at launch...
And don't ever even THINK of using any equipment or following any procedure not endorsed by Red Howard 'cause he's the world's foremost authority on anything and everything hang gliding. Can we even begin to imagine how many pilots would've died due to the failures of work hardened sidewires if people had ignored Red and adhered to the preflight procedures in their Wills Wing owners manuals? One shudders to think.I would not endorse that device, unless it was very similar to a football player's mouth-guard.
- But Red has always been much to busy warning people of the dangers of existing tow equipment to produce any sane alternatives himself.Some device that is activated by driving a breath into a small rubber tube should be safer that any semi-hard object in the mouth, unless that object is similar to a mouth-guard.
- Sure thing, Red. The Industry pin benders are gonna engineer a release in which a driven BREATH is gonna be able to safely blow four to six hundred pounds of towline tension. I'll start holding mine right now in preparation for the day that happens.
So you'd be OK with me putting a gun to the back of your head and pulling the trigger?I would encourage any reduction in risks, when flying.
Any thoughts on the 2021/05/08 Federico Baratto unhooked launch fatality? Just kidding, you've been FAR too engaged in warning people about the insane dangers of the Kaluzhin release to deal with any ACTUAL issues.My US$.02 worth . . .
The Davis Show itself was broken before it ever started. This is what happens when you get total dickheads it total control of communications, standards, operations.Dan DeWeese - 2021/05/06 15:25:47 UTC
the ozreport links to back issues mentioning it are broken.
People have been INTERESTED since the beginning of time. So any thoughts on why the Russians and Eastern Europeans have been USING these releases since the beginning of time - with ZERO documented issues - while they're virtually nonexistent in the West?Post back here if you find it as I'm interested too.
Yep. 'Cept Dave got ignored and pissed all over in his selfless efforts to help get these into circulation. Last active:dew98765 - 2021/05/06 19:28:16 UTC
Is this the item that you are asking about?
http://www.hanggliding.org/viewtopic.php?t=34505
Russian Mouth Release For Sale
- 2018/02/14 11:53:35 UTC - The Jack Show
- 2017/06/18 04:05:36 UTC - Kite Strings
So very depressing.
Why do you think? The hot gliders all looked pretty close to identical, wouldn't one expect the towing equipment to all be the same after decades of positive evolution? The way we see things with sailplanes?Col Rushton - 2021/05/06 21:22:07 UTC
At the Dalby Big Air aero-tow comp 2 weeks ago I saw a few different bridle set ups and releases.
And no mention of differences - so we know they were all bent pin.95% were Pro-tow setups with barrel releases...
It's totally beyond me why anyone would use a Kaluzhin after Peter Birren solved all of our tow issues for us....a least one Birren Link-knife release and one Mouth release, both using a pro-tow bridle set-up.
Guess his smile must've been pretty hard to look at after all those launch face plants with all that metal between his teeth.Talking to Michael about his mouth release, he was very happy after 5 years with his set-up...
Any chance you could get him over there on The Jack Show to tell Red to go fuck himself?...however he was wanting to buy a new one too.
Ya think? Shouldn't we kill a few more Jeff Bohls to make absolutely sure?There are many issues to consider when thinking about your towing set-up but being able to release while still holding on, trying to control a worsening situation is a great plus.
If the fuckin' HG manufacturers weren't all useless pieces o' shit they'd ship ALL of their gliders with bulletproof built-in release systems.My mate thought if a HG manufacturer would sell a mouth release perhaps their use may increase?
Could be - if he weren't totally and permanently full o' shit.Incorporating some of Reds suggestions could be good.
Hope there's enough left of the sport by the time you get it to be able to use it.Hope you find your Russian Harry
Still no comment anywhere on that unimaginably horrifying thousand foot plummet two days ago. And I'm supposed to be the sport's most callous sociopath ever.